Reverb 2016 Specifications

Audio Input

Connectors

1/4” T/R/S phone jacks (2)
XLR 3-wire balanced (2)

Impedance

+4dB/Bal switch position: 100kOhm
-10dB/Unbal switch position: 50K Ohms

Levels

+4dB/Bal switch position:
    -2dBu min for full scale
    +20dBu max

-10dB/Unbal switch position:
    -14dBu min for full scale
    +8dBu max
Audio Output

Connectors

1/4” T/R/S phone jacks (2)
XLR 3-wire balanced (2)

Impedance

125 Ohms, each side, balanced

Levels

+18dBm max, full scale, balanced/unbalanced
Digital Input/Output

Digital Input
Digital S/PDIF Input
Sample Rate: 44.1kHz – 48kHz (downsampled to 40kHz)
Connector: Coaxial, RCA type
Digital Input is selected via front panel switch.

Digital Output
Digital S/PDIF output
Sample Rate: 44.1kHz or 48kHz with ext clock
Connector: Coaxial, RCA type
Digital output is always active at 44.1 kHz when not using digital input
Frequency Response

Dry 20Hz-20kHz, +/-1dB
Wet 20Hz-16kHz, +-1dB
Dynamic Range

>90dB
20 Hz - 20 kHz, Non A-weighted
Sample Rate

40.0 kHz
Conversion

24 Bits A/D, 24 Bits D/A
Environment

Operating temperature: 32° to 104°F (0° to 40C)
Storage: –20° to 170°F (–30 to 75°C)
Relative humidity: 95% non-condensing

Throughput delay

Less than 2 ms
THD

<= .05% , 20Hz - 20kHz
Crosstalk

<= 45dB below full scale
Dimensions

Width 19”
Depth 6”
Height 1.75”
Weight 9.5 lbs

All specifications subject to change without notice or obligation

This page created 07 June 2003