Since the release of version 3.000 a few small issues have appeared. These have been resolved in incremental version 3.002.  The workarounds remain applicable to version 3.000.

System affected: Orville/R
Issue: EVE/NET initialization

During the first restart after the upgrade the system will ask whether to clear the internal setup. The problem is that the EveNet screen is not alive at this point so the system appears to hang, with the blue power light flashing and the green update light lit steadily.

Workaround: Happily, the Evenet console keys are active, so hit the second soft key from the left to answer "yes" to the above question, and the system will then continue its normal startup routine. Future startups will
operate normally.

System affected: Orville, Orville/R
Issue:  MIDI Program Change messages

MIDI Program change messages above base+2 will load Orville routings, where base is the MIDI base channel setting (Setup/MIDI screen). Base+2 should indeed load the routing, but channels above this should have no
effect.

Workaround: neither use channels above base+2 nor use base -1. Set base to a high value so that base-1 is above all other channels if connecting multiple systems to the same MIDI.


System affected: Orville, Orville/R, DSP7500
Issue: Sampler recording sample rate


When making a sampler recording while the system is using an external clock, the sample rate can be stored wrongly, causing a pitch change during playback.

Workaround: perform all sampler recordings on internal clock at 48K sampling, using sample rate conversion on digital I/O where necessary. On playback, they will be automatically sample-rate-converted to match the
playback sample rate.

System affected: DSP7000,7500
Issue: MIDI Program Change messages

MIDI Program change messages above base will cause a "file not found" message, where base is the MIDI base channel setting (Setup/MIDI screen).

Workaround: neither use channels above base nor use base -1. Set base to a high value so that base-1 is above all other channels if connecting multiple systems to the same MIDI.