Eventide BD600 Broadcast Delay Specifications

Sample Rates 48 kHz, 44.1 kHz, Word Clock, AES/EBU,
DIGITAL Inputs/Outputs 2 channels of 24-bit AES/EBU,
Frequency Response Live or Bypass 20 Hz-20 kHz +- 0.1 dB
  HD MicroPrecision Delay mode 10 Hz-19 kHz +- 0.25 dB
  Broadcast Profanity Delay mode* 10 Hz-20 kHz +- 0.1 dB
*While delay is changing 10 Hz-19kHz +-1.5dB
ANALOG INPUT XLR pin 2 hot, true differential balanced, +4 dBm nominal
Impedance 20 K Ohm (bridging)
Full Scale Input Level +26 dBu
Dynamic Range >104 dB
Signal to Noise Ratio >104 dB
THD+N <0.003 @ 1 kHz, -3 dBFS
Crosstalk <-100 dB @ 20 Hz
to 20 kHz, - 1 dBFS
ANALOG OUTPUT XLR pin 2 hot, true differential balanced, +4dBm nominal
Impedance <50 Ohm
Full Scale Input Level 26 dBu
Dynamic Range >108 dB
Signal to Noise Ratio >108 dB
THD+N <0.003 @ 1 kHz -3 dBFS In stable delay state
Crosstalk <-100 dB @ 20 Hz to 20 kHz,-1 dBFS
Profanity Delay Maximum Can be set to 4, 6, 8, 12, 16, 20, 30, 40, 60, or 80 seconds
Micro Precision Fixed Dly Can be set from .010 seconds to 9.999,999 seconds in microsecond steps
Remote Control Inputs RS-232 control input and output
Basic Remote 4 configurable inputs (closure to ground), 2 relay-isolated status outputs
Optional Extended Remote 16 bi-polar opto-isolated inputs, 16 open-collector outputs
RS-232 input and delayed output
Compact Flash Interface Supports Type I and Type II Compact Flash cards for .WAV sample playback and software update.
Power 40 watts, 100-240 VAC, 50/60 Hz
Size Inches: 1.75h x 19w x 10.5d;  CM: 4.5h x 48.3w x 26.7d
Weight 9 pounds (4.1Kg); shipping weight 12 pounds (5.5 Kg)

Eventide is a registered trademark, and MicroPrecision Delay is a trademark of Eventide Inc. All Specifications are subject to change without notice. 2005 Eventide Inc.


This page created 14 April 2005